Quick Overview:

Step 1: Log in to your Console

Step 2: Choose the Canary

Step 3: Open the configuration

Step 4: Save as a custom device personality

Step 5: Confirm the save

Step 6: Select the target Canary

Step 7: Open the configuration menu

Step 8: Apply the saved personality

Step 9: Deploy the new configuration

Description: You have the ability to save a pre-existing device configuration as a custom personality and easily apply the saved personality to the other Canaries.

This can be useful for sharing base network settings (Note: this does not include the IP Address as each device will need a separate IP), specific service configuration or even file structures for your Windows file shares.

Note: The custom personality will not include the following settings (which you'll need to configure yourself):

• Device Name
• Location
• IP Address
• Mac Suffix
• The below Windows file share options (if enabled):
  • Mode
  • Advanced config (including all domain-related values)

Follow the steps below to create a custom personality for your Canary:

Step 1: Log in to your Console

Step 2: Choose the Canary

Select the Canary you want to save the personality.

Note: we have selected the CT-Office-01 Canary.

Step 3: Open the configuration

Click the gear icon (Configure Canary) icon to configure this Canary.

Step 4: Save as a custom device personality

1. Tick Save as custom device personality. Give the personality a name (Note: we chose Base Windows File Share)
2. Click Deploy new configuration.

Step 5: Confirm the save

Your new configuration will be pushed down to your Canary and the custom personality will be saved on your Console.

Step 6: Select the target Canary

Select the Canary you want to apply the saved custom personality to.

Note: we have selected the CT-Office-02 Canary.

Step 7: Open the configuration menu

Click the gear icon (Configure Canary) icon to configure this Canary.

Step 8: Apply the saved personality

Select the custom personality from the Device Personality drop-down list.

Note: custom personalities are at the bottom of the list.

Step 9: Deploy the new configuration

Once you've selected the custom personality, you will then need to click on Deploy new configuration.

You're done!