Congratulations on acquiring your Canary! We'll have you up and running quickly. Please follow the steps shown below.
To setup your Canary, you'll need:
Connect your Canary to your network with an Ethernet cable.
Plug the USB power cable into any USB socket OR supplied USB power adaptor.
As your Canary boots, hold down the button (the LED is a button too!) for about 15 seconds. The status LED will show purple, then blue. When it turns blue, it's ready to be setup.
Click on "Add a device"
Let Windows detect the Canary and then select "Canary-xxx" and click "Next".
The Canary has successfully been added to Devices and Printers on your workstation. You can now click "Close"
Right Click on “Canary-xxx” navigate to "Connect Using" and click on "Access Point"
Your Canary will now be connected to your workstation over Bluetooth.
In your browser surf to http://setup.canary.tools.
If your browser cannot contact the site, click here.
Give your Canary a name and record where it'll be installed, configure its IP settings (either static or DHCP), select a device personality and Save.
For more configuration options, click here.
Your configured Canary now needs to register itself with your console. Open another browser tab to your console and login. This will allow the Canary to register automatically.
If automatic registration fails, click here for information about offline registration.
In your hosted console, you'll get a popup notification with the details of your newly registered Canary. Carefully verify the details and approve the registration.
With your Canary setup, move it to its production environment and power it up. When the status LED goes Green, the Canary is live.